| General specifications |
|---|
| Speaker type |
Full-range, powered speaker, bass reflex |
|---|
| Frequency range (-10dB) |
80Hz - 20kHz *1 |
|---|
| Nominal coverage | H |
170° |
|---|
| V |
25° (+12.5° - -12.5°) |
|---|
| Effective coverage (-10dB) | H |
180° |
|---|
| V |
30° (+15° - -15°) |
|---|
| Components | LF-HF |
1.5"(3.75cm) Cone x 16 |
|---|
| Maximum output level (1m; on axis) |
102 dB SPL (when using PoE+(IEEE 802.3at)) *2 |
|---|
| Power rating | Dynamic |
15W (PoE+ (IEEE 802.3 at)), 6W (PoE (IEEE 802.3 af)) |
|---|
| Continuous |
15W (PoE+ (IEEE 802.3 at)), 6W (PoE (IEEE 802.3 af)) |
|---|
| I/O connectors |
RJ-45 (Dante) x１ |
|---|
| Protection circuit | Speaker processing |
Clip limiting, Integral power protection |
|---|
| Amplifier protection |
Over current protection, Over temperature protection, Under voltage lock out, DC detection, Clock detection |
|---|
| Power supply protection |
Over load protection, Over voltage protection, Under voltage lock out |
|---|
| Cooling |
Natural convection |
|---|
| Power requirements |
PoE+(IEEE 802.3at), PoE(IEEE 802.3af) |
|---|
| Power consumption |
Idle: 3W, 1/8(Pink Noise): 6W (PoE+(IEEE 802.3at)), 4.3W (PoE(IEEE 802.3af)) |
|---|
| Finish |
VXL1B-16P: Black painting (approximate value: Munsell N3.0), VXL1W-16P: White painting (approximate value: Munsell N9.0) |
|---|
| Magnetic shielding |
No |
|---|
| Dust and water resistant |
No |
|---|
| Accessories |
Mounting bracket x2, Bracket base x2, Safety wire x1, Machine screws (M5x10) x2, Template x1, Owner's manual |
|---|
| Options |
WMB-L1B (W), HCB-L1B, PA-L1B |
|---|
| Packaging |
Packaged in 1 pc |
|---|
| Dimensions (W x H x D) |
W54 x H1120 x D104 mm (Speaker only) |
|---|
| Weight |
5.0kg (Speaker only) |
|---|
