توضیحات
SP2060 Speaker Processor
An ideal match for the I-Series speakers, the SP2060 is a high-performance 2-in/6-out speaker processor with 96 kHz capability.
مشخصات فنی
| SP2060 | ||
|---|---|---|
| Outline | ||
| I/O | Line inputs | 2 |
| AD converter | 24-bit; 64-time over sampling | |
| Line outputs | 6 | |
| DA converter | 24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling | |
| Digital I/O | 1x AES/EBU (2-in/2-out) | |
| General specifications | ||
| Internal processing | 32bit | |
| Sampling frequency rate | Internal | 96kHz |
| External | 44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%) | |
| Signal delay | Less than 761 micro sec | |
| Total harmonic distortion | Less than 0.05% (20Hz-40kHz) | |
| Frequency response | 0, +0.5, -1.0dB 20Hz-40kHz | |
| Dynamic range | DA: 110dB; AD+DA: 106dB | |
| Hum & noise level | Residual output noise | -86dBu (Digital input), -82dBu (Analog input) |
| Crosstalk | -80 dB | |
| Power requirements | AC100-240V 50/60Hz | |
| Power consumption | 30W | |
| Dimensions | W | 480mm; 18-7/8in |
| H | 44mm; 1-3/4in (1U) | |
| D | 361mm; 14-1/4in | |
| Net weight | 9.3kg; 20.5lbs | |
| Accessories | Owner’s manual, AC power cord, 4x Rubber foot | |
Analog input and output characteristics
| Terminal | Actual load impedance | For use with nominal | Level | Connector | |
|---|---|---|---|---|---|
| Nominal | Max. before clip | ||||
| Input A, B | 10k ohms | 600ohm Lines | +4dBu | +24dBu | XLR-3-31 type (Balanced) |
| Output 1 - 6 | 75ohms | 600ohms Lines | +4dBu | +24dBu | XLR-3-32 type (Balanced) |
Digital input characteristics
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| Digital Input AES/EBU | AES/EBU | 24-bit | RS422 | XLR-3-31 type (Balanced) |
