توضیحات
26 x 8 Matrix Mixer / Signal Processor
- 8ch mic/line input and 8ch analog output
- 16ch YDIF digital I/O
- SD Card Slot for playback
34 x 16 Matrix Mixer / Signal Processor
- 8ch mic/line input and 8ch analog output
- 16ch YDIF digital I/O
- 16ch Dante digital I/O
- 1x MY Card slot
- SD Card Slot for playback
Input Expander/Output Expander
EXi8 input expanders convert analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be controlled remotely from MTX/MRX series processor via Ethernet cable.
EXo8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX/MRX series processors via YDIF.
Digital Control Panel - DCP Series
Digital Controller Hub
Paging Station
The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.
- Dante network support
- 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
- Up to 4 units can be connected per system
- PoE powered
- Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
- Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)
The PGX1 is a paging station extension that can be used with the PGM1.
- Function expansion for the PGM1
- 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
- Up to 2 units can be connected to each PGM1
- Dimensions: 132(W) × 56(H) × 154(D) mm
- Weight: 0.9 kg (excluding connecting bracket)
Wall-Mount Controller
Wall-Mount Controller
- 6 buttons can be assigned to any functions * MTX/MRX series functions (components) are specified via the MTX-MRX Editor
- Multi-language displays supported
- Four user levels for access management
- Up to 16 units can be connected per system
- PoE powered
- Back can adapter supplied
- Dimensions: 149(W) x 125(H) x 18(D) mm
- Weight: 0.5 kg
L2 Switch
The SWR2100P series network switch equipped with ten RJ45 ports.
- Ports available for PoE power supply: 1-9 / Up link port: 9 port
- Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)
The SWR2100P series network switch equipped with five RJ45 ports.
- Ports available for PoE power supply: 1-4 / Up link port: 5 port
- Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)
Recommended settings for stable operation of a Dante network (such as QoS, EEE, and IGMP Snooping) can be made easily
- LAN ports equipped with PoE supply: 8(1-8)
- LAN/SFP combo ports: 2(9, 10) (The LAN port and SFP slot are exclusively used)
- PoE supply is compliant with IEEE 802.3at, and can supply up to 30W to all PoE ports