توضیحات
The SWP2 series L2 switch is ideal for Dante 96kHz network systems. It features 10 etherCON ports and two single mode fiber opticalCON ports.
- etherCON Connectors: 4 front / 6 rear
- opticalCON Connectors: 2 front
- Dimensions (WxHxD): 480 x 44 x 362 mm (18.9" x 1.7" x 14.2")
- Net Weight: 4.6 kg (10.1 lbs)
- In-build RADIUS server for advanced security management
The SWP2 series L2 switch is ideal for Dante 96kHz network systems. It features 10 etherCON ports and two multi mode fiber opticalCON ports.
- etherCON Connectors: 4 front / 6 rear
- opticalCON Connectors: 2 front
- Dimensions (WxHxD): 480 x 44 x 362 mm (18.9" x 1.7" x 14.2")
- Net Weight: 4.6 kg (10.1 lbs)
- In-build RADIUS server for advanced security management
مشخصات فنی
SWP2-10MMF | SWP2-10SMF | ||
---|---|---|---|
Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, etherCON connector) | 10 | 10 | |
Number of SFP+ ports (10GBASE-SR, opticalCON DUO connector) | 2 | 0 | |
Number of SFP+ ports (10GBASE-LR, opticalCON DUO connector) | 0 | 2 | |
Console port | 1 (RJ-45) | 1 (RJ-45) | |
Automatic negotiation | Available | Available | |
Auto MDI/MDI-X | Available | Available | |
DIP switches | CONFIG, VLAN PRESET | CONFIG, VLAN PRESET | |
Indicators | Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2 | Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2 | |
Operating temperature | 0 to 40°C | 0 to 40°C | |
Storage temperature | -20 to 60°C | -20 to 60°C | |
Power supply (AC IN inlet) | AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type | AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type | |
Power supply (EXT DC INPUT inlet) | 24VDC±2V, 0.78A, XLR-4-32 type Connector | 24VDC±2V, 0.78A, XLR-4-32 type Connector | |
Maximum power consumption | 21W, 0.35A | 21W, 0.35A | |
Heat dissipation | 18.5 kcal/h | 18.5 kcal/h | |
Body material | Metal case, no fan | Metal case, no fan | |
Hazardous substances management | RoHS compliant | RoHS compliant | |
Dimensions | W | 480 mm | 480 mm |
H | 44 mm | 44 mm | |
D | 362 mm | 362 mm | |
Weight | 4.5 kg (excluding accessories) | 4.5 kg (excluding accessories) | |
Accessories | Power code, Owner's manual | Power code, Owner's manual | |
Options | PA-700 (AC adaptor) | PA-700 (AC adaptor) |
- * The LED MODE button allows the PORT indicators to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN.
INTERFACE SPECIFICATIONS
*1 These terminals support AutoMDI/MDI-X
*2 Conforming cable:
SWP2-10MMF: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
Maximum cable length: 300 m
SWP2-10SMF: SM-type single-mode fiber cables with a core diameter /cladding diameter of approximately 9 μm/125 μm.
Maximum cable length: 10 km
*3 10GBASE-SR: SWP2-10MMF, 10GBASE-LR: SWP2-10SMF
*4 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
*5 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
External power supply requirements: 24VDC±2V, 0.78A
CONNECTOR PIN ASSIGNMENTS
CONSOLE (RS-232C)
* These signals are not used on the SWP2.