TF سری

توضیحات
مشخصات فنی

توضیحات

میکسر دیجیتال سری TF به کاربر این امکان را می‌دهد که با سرعت و آزادی عمل بسیار بالایی بتواند نیازهای هنرمندان و موزیسین ها را برطرف کرده و صدای ایده‌ال را به مخاطب برساند .شرکت یاماها همواره برقراری ارتباط با نیازهای مهندسان صدا در سراسر جهان را به عنوان یک مأموریت در نظر گرفته است . نتیجه این امر در موفقیت کنسول های دیجیتال CL و QL و پرچمدار انها 7 RIVAGE PM مشهود است .رمز موفقیت همیشه در حمایت از خلاقیت کاربران بوده است و خلاقیت در مواقعی که محدودیت در آن وجود نداشته باشد بسیار موثر است و اکنون یاماها میکسر دیجیتال TF را معرفی کرده که به کاربر آزادی عمل بیشتری را ارائه می‌دهد. صفحه لمسی ، پیش تقویت کننده های D-PRE با کیفیت و همچنین عملکرد عالی در رابطه با اینترفیس های یاماها این میکسر جمع و جور را به گزینه ای مناسب و برجسته برای طیف گسترده ای از برنامه ها تبدیل می کند.

مشخصات فنی

TF5	TF3	TF1
Outline
Fader Configuration		32 + 1 (Master)	24 + 1 (Master)	16 + 1 (Master)
Mixing Capacity	Input Channels	48 (40 mono + 2 stereo + 2 return)	48 (40 mono + 2 stereo + 2 return)	40 (32 mono + 2 stereo + 2 return)
	Aux Buses	20 (8 mono + 6 stereo)	20 (8 mono + 6 stereo)	20 (8 mono + 6 stereo)
	Stereo Buses	1	1	1
	Sub Buses	1	1	1
Input channel functions		8 DCA Groups	8 DCA Groups	8 DCA Groups
I/O	Inputs	32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)	24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)	16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
	Outputs	16 (XLR)	16 (XLR)	16 (XLR)
	Expansion slots	1	1	1
On-board processors	DSP	8 Effects + 10 GEQ	8 Effects + 10 GEQ	8 Effects + 10 GEQ
General specifications
Sampling frequency rate	Internal	48 kHz	48 kHz	48 kHz
Signal delay		Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader		100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion		Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency response		+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT	+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT	+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range		110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.	110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.	110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Hum & noise level	Equivalent input noise	–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)	–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)	–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Hum & noise level	Residual output noise	–85 dBu, ST master off (Measured with an A-Weight filter)	–85 dBu, ST master off (Measured with an A-Weight filter)	–85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk		–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.	–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.	–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements		100–240 V 50/60 Hz	100–240 V 50/60 Hz	100–240 V 50/60 Hz
Power consumption		120 W	110 W	100 W
Dimensions	W	866 mm (34.1in)	716 mm (28.2in)	510 mm (20.1in)
	H	225 mm (8.9in)	225 mm (8.9in)	225 mm (8.9in)
	D	599 mm (23.6in)	599 mm (23.6in)	599 mm (23.6in)
Net weight		20.0 kg (44.1lb)	17.0 kg (37.5lb)	13.5 kg (29.8lb)
Accessories		Quick Guide, Power Cord, Nuendo Live	Quick Guide, Power Cord, Nuendo Live	Quick Guide, Power Cord, Nuendo Live
Options		Expansion Card, Foot Switch (FC5)	Expansion Card, Foot Switch (FC5)	Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5)
Others		Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C	Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C	Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C

Recording/Playback

PC/Mac (USB2.0)	Recording 34 tracks, Playback 34 tracks
USB Storage Device	Recording 2 tracks (USB hard drive/ SSD) ^*, Playback 2 tracks (USB hard drive/ SSD/ thumb drive)

*Please note - USB thumb drives are not supported by TF for recording purposes. Please refer to this link for compatible hard drives.

Analog Input Characteristics

Input Terminals	GAIN	Load Impedance	For Use With Nominal	Input Level			Connector	Balanced / Unbalanced
Input Terminals	GAIN	Load Impedance	For Use With Nominal	Sensitivity ^*1	Nominal	Max. before clip	Connector	Balanced / Unbalanced
INPUT1-32 (TF5) INPUT1-24 (TF3) INPUT1-16 (TF1)	+66dB	7.5kΩ	50-600Ω Mics or 600Ω Lines	-82dBu (61.6μV)	-62dBu (0.616mV)	-42dBu (6.16mV)	Combo Jack (XLR-3-31 type ^2 or TRS phone ^3)	Balanced
INPUT1-32 (TF5) INPUT1-24 (TF3) INPUT1-16 (TF1)	-6dB	7.5kΩ	50-600Ω Mics or 600Ω Lines	-10dBu (245mV)	+10dBu (2.45V)	+30dBu (24.5V)	Combo Jack (XLR-3-31 type ^2 or TRS phone ^3)	Balanced
ST IN 1,2	-	10kΩ	600Ω Lines	-30dBV (31.6μV)	-10dBV (316mV)	+10dBV (3.16V)	RCA Pin Jack	Unbalanced

*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are at maximum position.)
*2. 1: GND, 2: HOT, 3: COLD
*3. Tip: HOT, Ring: COLD, Sleeve: GND
*4. In these specifications, 0dBu = 0.775Vrms.
*5. +48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch.

Analog Output Characteristics

Output Terminals	Source Impedance	For Use With Nominal	Output Level		Connector	Balanced / Unbalanced
Output Terminals	Source Impedance	For Use With Nominal	Nominal	Max. before clip	Connector	Balanced / Unbalanced
OMNI OUT 1-16	75Ω	600Ω Lines	+4dBu (1.23 V)	+24dBu (12.3 V)	XLR-3-32 type ^*1	Balanced
PHONES ^*5	100Ω	40Ω Phones	3mW	75mW	Stereo Phone Jack (TRS) ^*2	Unbalanced

*1. 1: GND,2: HOT, 3: COLD
*2. Tip: LEFT, Ring: RIGHT, Sleeve: GND
*3. In these specifications, 0dBu = 0.775Vrms.
*4. All output DA converters are 24bit, 128times oversampling.
*5. The position of the level control is lowered by 16dB from the maximum.

Digital Input/Output Specifications

Terminals	Format	Data Length	Audio	Connector
USB (TO HOST)	USB	24bit	34ch input / 34ch output, PCM	USB (B type)
iPad	USB	-	Playback: MP3 or WAV file data / Record: WAV file data	USB (A type)

Control I/O Specifications

Terminals	Format	Level	Connector
NETWORK	IEEE802.3	10BASE-T/100Base-TX	RJ-45
FOOT SW	-	-	TS Phone

چاپ ایمیل

آدرس : تهران، لارستان، نبش کوچه ایرنا، شماره ۳۲، طبقه دوم
تلفن :88907184-88921730-88921803 88932738-88945876-88946811
فکس : 02188938637
پست الکترونیک : info [at] tasharqeshm.com

TF سری

توضیحات

مشخصات فنی

Recording/Playback

Analog Input Characteristics

Analog Output Characteristics

Digital Input/Output Specifications

Control I/O Specifications

شرکت تاشار قشم

دفتر هماهنگی

محصولات

سازهای مارش

سینتی سایزرها و...

سازهای سرگرمی الکترونیکی

دیداری و شنیداری

صوتی حرفه ای

برنامه های کاربردی

پیانوها

کیبوردها

گیتارها و...

درام ها

بادی ها

زهی ها

پرکاشن